Instructions for use
● Before coating, dust, moisture (moisture), and oil stains on the surface of the object to be coated must be removed and kept dry.
● Brushing, spraying, immersion coating and other methods can be used for construction. The coating is limited to no leakage or leakage. The thickness of a single coating is generally between 0.1 and 0.3mm
● It is advisable to obtain a thicker coating between layers. It is best to apply two thinner layers, and the second layer must be allowed to be applied only after the first layer has completely dried.
● After construction, lay it flat on the support and cure at room temperature.
● To repair a coated component, simply contact the soldering iron directly with the coating to remove the component. Then install new components and clean the area with a brush or solvent; It can also be cleaned with solvent; After drying, repaint with paint.
● It is not recommended to directly use surfaces with oil stains, plasticizers, solvents, etc. that may affect curing and bonding. When using on coating surfaces, the impact on the coating should be considered.
● After using this product, the rubber hose should be sealed for storage and reuse.
matters needing attention
● Before use, please refer to the MSDS in detail.
● The construction site must maintain good air flow.
● Wear protective equipment such as goggles, specialized gloves, shoes, and hats.
● Avoid contact with skin and eyes. If accidentally touching the skin, wipe it clean with a dry towel and wash it thoroughly with soap; If you accidentally come into contact with your eyes, immediately rinse with clean water, and if necessary, go to the hospital for examination.
● After use, the rubber hose of this product should be sealed for storage and reuse. This product is for industrial use only.
Packaging specifications
● This product is packaged in 1000ml/tin cans and 3000ml/tin cans. It can also be changed to specified specifications for packaging according to user needs.
Storage and transportation
● Store away from children.
● This product is a rapid curing product, and when stored unopened at 28 ° C or below this temperature, the shelf life is 3 months from the date of production.
● This product is non hazardous and is stored and transported as a general chemical.
What help can we provide for you?
Please inform us of your performance, design, and manufacturing issues. We will utilize our expertise in silicon-based materials, coating knowledge, and processing experience to provide you with services.
ChatNow