Instructions for use
● Before use, it is necessary to ensure that the indoor humidity is below 70% RH. Do not open the packaging before this.
● Before mixing, component A must be stirred evenly, and then proportioned according to the A: B=100:20 mass ratio. When mixing, it is necessary to be careful not to introduce too much air. It is recommended to use automatic mixing equipment to not only accurately mix resin and curing agent according to the correct proportion, but also not to introduce air.
● If not used, the containers for components A and B must be kept sealed at all times to prevent inhalation of moisture.
● After long-term storage, the filler in the adhesive will settle. Please mix evenly before use. Insufficient mixing can lead to unstable or incomplete resin performance.
● To reduce the viscosity of the mixture and facilitate subsequent sealing, component A can be heated to 50 ℃ before mixing. If the mixture is deaerated under a vacuum degree of 5-10mbar and then sealed for use, better mechanical and electrical properties can be achieved.
● Baking temperature: Bake at 60 ± 5 ℃ for at least 1 hour.
matters needing attention
● Before use, please refer to the MSDS in detail. Store away from children.
● It is recommended to use it in a well ventilated area.
● Avoid direct contact when using, and protective equipment such as gloves should be used. If it accidentally sticks to the skin, it must be immediately cleaned with soap and water. If it accidentally sticks to the eyes, it is necessary to first wash with a large amount of water and go to the hospital for examination.
● For industrial use only, please refer to MSDS for details.
Packaging specifications
● 30kg/set (A component: 25kg/barrel; B component: 5kg/barrel).
Storage and transportation
● Keep away from children, keep components A and B away from light and heat, and store in a sealed container.
● Store in a dry and cool place, avoid direct sunlight, with a temperature range of 5-30 ℃ and a relative humidity below 40% RH. The product has a shelf life of 6 months from the date of production.
● This product is non hazardous and is stored and transported as a general chemical.
ChatNow