Instructions for use
● Clean the surface of the object being glued and keep the clean and dry surface.
● The product quickly cures at room temperature and fully cures within 24 hours.
matters needing attention
● Before use, please refer to the MSDS in detail.
● Rubber materials should be stored in a sealed manner, and the mixed rubber materials should be used up at once to avoid waste.
● This product is not a hazardous material, but avoid contact with skin and eyes.
● After long-term storage, the filler in the adhesive will settle. Please mix well before use, without affecting performance.
● Contact with a certain amount of the following chemicals can cause the adhesive to not cure:
1. Organic compounds containing N, P, and S.
2. Ionic compounds containing elements such as Sn, Pb, Hg, and As.
3. Compounds containing alkynes and polyvinyls.
● In order to avoid the above phenomenon, before using glue sealing, the residual rosin on the device should be wiped clean as much as possible, and solder with low lead content should be used as much as possible.
Packaging specifications
● 50cc, 200cc, 400cc, 5 gallons, 55 gallons.
Storage and transportation
● Store away from children, keep the product away from light and heat, and store it in a sealed container.
● When stored unopened at or below 28 ° C, the product has a shelf life of 6 months from the date of production.
● This product is non hazardous and is stored and transported as a general chemical.
What help can we provide for you?
Please inform us of your performance, design, and manufacturing issues. We will utilize our expertise in silicon-based materials, coating knowledge, and processing experience to provide you with services.
ChatNow