Instructions for use
● Clean the surface of the object being glued and keep the clean and dry surface.
● Before mixing, the two parts A and B in storage should be thoroughly stirred and evenly mixed.
● Mix and use in a 1:1 mass ratio, pour into a container 4 times the volume of the gel to prevent the gel from expanding and overflowing during the defoaming process.
● After mixing, the entrained air can be removed by vacuum method, and the air can be extracted at a vacuum degree of 28 "Hg. The bubbles can be removed in 2 minutes, and the extraction time can be extended when the volume is large.
● The product quickly cures at room temperature and fully cures within 24 hours.
matters needing attention
● Before use, please refer to the MSDS in detail.
● Rubber materials should be stored in a sealed manner, and the mixed rubber materials should be used up at once to avoid waste.
● This product is not a hazardous material, but avoid contact with skin and eyes.
● After long-term storage, the filler in the adhesive will settle. Please mix well before use, without affecting performance.
● Contact with a certain amount of the following chemicals can cause the adhesive to not cure:
1. Organic compounds containing N, P, and S.
2. Ionic compounds containing elements such as Sn, Pb, Hg, and As.
3. Compounds containing alkynes and polyvinyls.
● In order to avoid the above phenomenon, before using glue sealing, the residual rosin on the device should be wiped clean as much as possible, and solder with low lead content should be used as much as possible.
Packaging specifications
● Component A, 25kg/barrel.
● Component B, 25kg/barrel.
Storage and transportation
● Keep away from children, keep components A and B away from light and heat, and store in a sealed container.
● When stored unopened at or below 28 ° C, the product has a shelf life of 6 months from the date of production.
● This product is non hazardous and is stored and transported as a general chemical.
Please read carefully
All data included here was measured at the Jiaduobao laboratory and is only for product selection reference. We recommend conducting sufficient testing in your laboratory or factory to determine whether the product meets all of your requirements.
ChatNow