Instructions for use
● Weigh components A and B in a 1:1 weight ratio, mix them evenly, and directly inject them into the components (or modules) that need to be sealed for protection.
● The encapsulated components can be cured directly at room temperature by standing still. The natural defoaming time is 10~15min, the natural gel time is about 90min, and the complete curing time is about 3 hours. matters needing attention
● Before use, please refer to the MSDS in detail.
● Excessive temperature can lead to a faster curing rate. It is recommended to maintain a constant temperature in the environment.
● Vacuum defoaming of mixed AB components can improve the performance of hardened products.
● Components A and B should be sealed and stored after use.
● JDB917 is difficult to harden when in contact with sulfur-containing, amine, and tin materials.
● In order to avoid the above phenomenon, before using glue sealing, the residual rosin on the device should be wiped clean as much as possible, and solder with low lead content should be used as much as possible.
Packaging specifications
● 20 kg/set (A component: 10Kg/barrel; B component: 10Kg/barrel)
Storage and transportation
● Store away from children, keep the product away from light and heat, and store it in a sealed container.
● When stored unopened at or below 28 ° C, the product has a shelf life of 6 months from the date of production.
● This product is non hazardous and is stored and transported as a general chemical.
What help can we provide for you?
Please inform us of your performance, design, and manufacturing issues. We will utilize our expertise in silicon-based materials, coating knowledge, and processing experience to provide you with services.
ChatNow