Products
thermal grease
Home >> Products >> Thermal conductive materials... >> thermal grease
JDB520 thermal conductive silicone grease (heat dissipation paste)
JDB520 thermal conductive silicone grease, as a medium for heat transfer, has excellent thermal conductivity, good lubrication and electrical insulation, as well as good resistance to high and low temperatures; With low viscosity and good construction performance, this product is based on polysiloxane and supplemented with high thermal conductivity fillers. It is non-toxic, odorless, and non corrosive, meeting RoHS directives and relevant environmental requirements, and has stable chemical and physical properties.
Feature
● Safe and environmentally friendly, RoHS compatible;

● Efficient thermal conductivity and high electrical insulation.

● Low pressure compression application, low pressure, with high compression ratio.

● Good temperature resistance, capable of automated use
Parameter

特 性

单 位

典型值

测试标准

颜色

/

灰色

Visual

密度

g/cc

2.80±0.2

ASTM D792

针入度

g/min

280±30

ISO9048

最小结合厚度

mm

0.1

/

耐热範围

℃

-50~200

/

油离度(200℃×8hr)

%

< 1.0

ASTD E595

导热系数

W/mK

2.00±0.2

ASTM D5470

热阻@50psi

℃-in2/W

0.02

ASTM D5470

介电击穿强度

V AC/mil

>800

ASTM D149

体积电阻

Ω ·cm

1x1014

ASTM D257

介电常数

@1MHz

5.5

ASTM D150

储存期限(25℃)

月

6

/
application
Widely used as a heat transfer medium for long-term protection of sensitive electrical components: between CPUs, GPUs and heat sinks, chips and chipsets, LED lighting equipment, power supplies and UPS, LCD and PDP flat panel displays, communication products, etc. This product is particularly suitable for components with high heat dissipation requirements.
Usage method
Instructions for use

● Firstly, clean the surface to be coated, then stir the thermal conductive mud evenly, and then apply it to the contact surface of the product using a spot coating method. After the operation is completed, the unused products should be sealed and stored in a timely manner. Depending on the amount used, a suitable amount of hose can be manually squeezed for use, or a dedicated extruder can be installed for extrusion.


matters needing attention

● Store in a cool, dry, and ventilated place. The thickness of adhesive application should not exceed 6mm, and avoid contact with eyes when applying adhesive;

● This product is non-toxic and non hazardous, and can be handled and transported according to general chemicals;

● After the product is opened, the shelf life for storage is 6 months;

● Please refer to the MSDS of this product before use.


Packaging specifications

● 30ml/PE pipe, 300ml/PE pipe, 1KG/PE tank.
Related products
JDB7905 B silicone sealant
JDB7901 silicone adhesive sealant...
JDB7180W silicone sealant
JDB832 silicone sealing silicone...